Filter
Top Products
Configuring the System Board
Opening the System
NCR S10XL Hot Plug Server User Guide 2-17
To open the system, follow these steps:
1.
Unlock the housing using the key and open the
lower front panel cover by pressing the button and
pulling the cover.
You can not remove the key after you have
unlocked the housing. You can remove it only when
you lock the housing again.
2.
Pull on the key to swing the left side of the housing
open. If necessary, you may use a screwdriver
gently to pry the side of the housing open.
Figure 2-8
Opening the Cabinet Housing
Note: