Filter
Top Products
Configuring the System Board
Major Components
NCR S10XL Hot Plug Server User Guide 2-5
Figure 2-1
System Board Layout
PCI Slots
JP4
JP2
JP6
JP3
JP1
JP5
COM 1
COM 2
Parallel Port Interface
Diskette Drive Interface
Fixed Disk Drive Interface
Power Connector 1 (230 watt)
Power Connector 2
Fast SCSI-2 Interface (wide)
Fast SCSI-2 Interface (narrow)
CPU Board Slot
Power LED Connector
Hard Disk LED Connector
Fan Connectors
Turbo Reset
Connector (J23)
BIOS
PS/2
Mouse Connector
PS/2
Keyboard Connector
Speaker
Connector (J24)
EISA
Expansion Slots
You have to change the jumper settings on the system
board when you upgrade the CPU or reconfigure the
system.
To change a jumper setting, follow these steps:
1.
Remove the jumper cap from the jumper.
2.
Position the jumper cap over the two pins for the
desired setting.
Jumper Settings