Filter
Top Products
Configuring the System Board
Installing SIMMs
2-10 NCR S10XL Hot Plug Server User Guide
Always install SIMMs starting with Bank 0 and
in pairs. For example, for a total memory of 8 MB,
install two 4 MB SIMMs in sockets 0 and 1 of Bank 0.
You can not use an 8 MB SIMM alone for an 8 MB
memory.
Figure 2-3
SIMM Sockets
SIMM Sockets
Bank 1
Bank 0
To remove SIMMs, follow these steps:
1. Press the holding clips on both sides of the SIMM
outward to release it.
2. Press the SIMM downward at about a 45
o
angle.
Note:
Removing SIMMs