Filter
Top Products
Configuring the System Board
Major Components
2-4 NCR S10XL Hot Plug Server User Guide
Major Components
The system board has the following major components:
•
Four 72-pin SIMM sockets labeled Bank 0 and
Bank 1 (two sockets comprise one bank)
•
One CPU board slot
•
Four 32-bit EISA expansion slots supporting
master/slave add-on cards
•
Two PCI local bus slots
•
One shared slot (EISA or PCI)
•
128/256 KB Flash memory for easy system BIOS
upgrade
•
I/O interfaces for two serial ports, one parallel port,
peripheral drives, IDE drives, and one PS/2
keyboard and mouse
•
Onboard AIC-7870 chip that supports one SCSI-2
port
•
Power connector 1 for 350-watt switching power
supply
Figure 2-1 shows the location of the major components
on the system board.