NCR S10XL Food Warmer User Manual


 
Sample Configurations
Sample Standard Configuration
C-2 NCR S10XL Hot Plug Server User Guide
Sample Standard
Configuration
A standard configuration might consist of the following:
Pentium 166 MHz processor with parity memory
support
32 MB system memory
ISA video board with 1 MB video RAM
PCI Ethernet adapter (SMC8432BTA)
PCI Token Ring adapter (Olicom OC-3136)
2 GB SCSI Fast and Wide disk drive connected to an
integrated Adaptec 7870 PCI SCSI controller
SCSI CD-ROM drive connected to an integrated
Adaptec 7870 PCI SCSI controller
Following are the steps to install and configure this
sample configuration.
To install the hardware, follow these steps:
1.
Strap the SCSI IDs for the 2 GB SCSI disk drive and
the SCSI CD-ROM drive. (See the documentation
that came with your drives for strapping
information.)
2
.
Install the 2 GB SCSI disk drive in a hot plug carrier
and install in the top hot plug bay.
Installing the
Hardware