Filter
Top Products
Error Messages
System Error Messages
NCR S10XL Hot Plug Server User Guide B-3
System Error Messages
A system error message indicates a problem with the
computer itself. A message of this type normally
appears during the power-on self-test, before the
operating system prompt appears.
Table B-1 lists system error messages and the
corresponding corrective measures.
Table B-1
Error Messages
Message Action
CMOS battery error Replace the RTC chip or contact your dealer.
CMOS Checksum Error Check the RTC chip and the necessary jumper. If the
battery is still good, run Setup.
Display card mismatch Run Setup.
Diskette drive error Diskette may be bad. If not, replace the diskette drive
or cable.
Diskette drive controller error or not
installed
Check and connect the control cable to the diskette
controller.
Diskette drive A type mismatch Run Setup and select the proper drive type.
Diskette drive B type mismatch Run Setup and select the proper drive type.