Filter
Top Products
Using the System Utilities
Using the EISA Configuration Utility
NCR S10XL Hot Plug Server User Guide 5-7
3.
The Advanced Configuration Menu displays.
4.
Press any key to continue. The system loads the
configuration files. If any are not found on the ECU
diskette you are prompted for the diskette that
contains the required configuration files.
Sometimes the EISA Configuration Utility will not boot.
If this happens, perform the following procedure:
1.
Using the BIOS Setup Utility, disable all PCI
adapters.
2.
Boot the EISA Configuration Utility.
3.
Configure the system.
4.
Go back into the BIOS Setup Utility, and re-enable
the PCI adapters.
What If It Will Not
Boot?