Filter
Top Products
Sample Configurations
Sample Standard Configuration
C-4 NCR S10XL Hot Plug Server User Guide
4.
Select Basic System Configuration. To go from page
to page, press [Page Down] or [Page Up].
5.
Go to page 2 and set parameters as follows (in the
order indicated):
Hard Disk Block Mode [Disabled]
Advanced PIO Mode [Disabled]
Hard Disk Size > 504
MB
[Disabled]
Hard Disk 32-Bit Access [Disabled]
Auto Configuration
Mode
[Disabled]
Fast Boot Mode [Disabled]
Num Lock After Boot [Enabled]
Memory Test [Enabled]
6.
Return to page 1, and set parameters as follows:
Diskette Drive A [1.44 MB 3.5-inch]
Diskette Drive B [None]
Fixed Disk 0 ( 0 MB) [None]
Fixed Disk 1 ( 0 MB) [None]
7.
Press [Esc] to return to the main menu in BIOS
Setup.
8.
Select Advanced System Configuration.
Page 1 - Verify that the parameters are set as follows:
C0000h - C7FFFh (Video BIOS) [Enabled]
C8000h - CFFFFh [Disabled]
D0000h - D7FFFh [Disabled]
D8000h - DFFFFh [Disabled]
Internal Cache (CPU Cache) [Enabled]