Filter
Top Products
Using the System Utilities
Using the EISA Configuration Utility
5-12 NCR S10XL Hot Plug Server User Guide
• Print configuration data about an installed board or
the entire system
• Lock a configuration with the current settings; for
example, the board resources are locked in the
system and do not change when you add new
boards to the system
• Solve resource conflicts on a computer with locked
boards
At the top of the screen is a bar listing pull-down
menus. Use the pull-down menus to enter configuration
data about your computer. As you enter information,
the entries are verified (when Auto Verify is turned on).
If the utility finds any resource conflicts, you must
correct the errors by changing function and resource
choices. When there are no resource conflicts, the
configuration information is saved in an SCI file.
The bottom of the screen shows a line that contains a list
of the keys you can use. You can get help information
about a selection on a menu or any object on a screen by
pressing [F1] while your cursor is on the selection or
object.
You can also display help information from the Help
Topics Index by selecting Help Topics from the Help
pull-down menu or by pressing [Shift] + [F1].
Memory is not configured automatically. The system
administrator must use the EISA Configuration utility
(ECU) to configure the system manually.
Configuring the
System Memory