Filter
Top Products
Sample Configurations
Sample RAID Configuration
NCR S10XL Hot Plug Server User Guide C-19
5.
Press [Enter] to return to previous menu.
6.
Select Advanced Configuration Options and set the
parameters as follows:
Host Adapter BIOS (Config Util...) [Enabled]
Support Removable Disks... [Boot Only]
Extended BIOS Translation... [Enabled]
Display <CTRL-A> Message During
BIOS Initialization...
[Enabled]
Multiple LUN Support [Disabled]
BIOS Support for More than 2... [Enabled]
7.
Press [Enter] to return to previous menu.
8.
Press [Esc] until prompted to save configuration.
Save the configuration and the system reboots.
The procedure is the same as the procedure for
configuring memory and other baseboard settings in the
Standard Configuration. The procedure is repeated for
your convenience.
Sometimes the EISA Configuration Utility will not boot.
If this happens, perform the following procedure:
1.
Using the BIOS Setup Utility, disable all PCI
adapters.
2.
Boot the EISA Configuration Utility.
3.
Configure the system.
Configuring the
Memory and Other
Baseboard Settings