Filter
Top Products
Operation
34
Pulse P lus
ON
OFF
OVEN OFF
COOL
DOWN
COOK
LIGHT S
FAN DELAY TIMER
TIMER
SOLID STAT E
THERMOSTAT
HI
LO
BLOWER
1
3
2
LIGHT OFF
OVEN READY
4
5
6
8
7
9
60Hz
Only
Figure 17
CONTROL DESCRIPTION
1. SELECTOR SWITCH --- controls power to the
oven f or cook or cool d own.
2. BLOWER SWITCH --- controls blower speed,
either hi or lo. Two speed not available in 50 Hz.
3. LIGHTS SWITCH --- controls interior lights.
4. AMBER FAN DELAY LIGHT --- indicates the
oven is in pulse plus.
5. FAN D ELAY TIMER --- activates pulse plus for
0---10 minutes. The blower and burners pulse
on for 30 seconds a nd off for 30 seconds for
the duration of time set.
6. REDINDICATORLIGHT---indicatesovenisin
the cook timer cycle.
7. COOK TIMER --- activates an electric buzzer
that sounds when t he cook time expires.
8. OVEN READY LIGHT --- when lit indicates
burner operation. When the light goes out, the
oven has reached operating temperature.
9. SOLID STATE THERMOSTAT --- allows either
8 pre-set temperatures to be selected in ac-
cordance with customer requirements, or an
infinite selection of temperatures from
0-500_F (0-260_C). (infinite control s hown)
OPERATION
1. Turn the SELECTOR Switch (1) to COOK.
2. Set the SOLID STATE THERMOSTAT (9) to the
desired cook temperature.
3. Preheat the oven until the OVEN READY
LIGHT (8) goes out.
4. Load product into the oven.
5. Set FAN DELAY TIMER (5) for the desired time
for pulse plus operation.
6. Set the COOK TIME R (7) for the desired cook
time.
7. When the buzzer sounds, remove product
fromthe oven. Turn the TIMER (7) knob toOFF
to silence the buzzer.
8. Turn the SELECTOR SWITCH (1) to OVEN
OFF.
WARNING!!
Acompletefiveminuteshutdownmustbe
observed before the oven is relighted.