Filter
Top Products
Table 10B — Timing Out or Timed Out
Primary Message Secondary Message Probable Cause/Remedy
Ready To Start In XX Min
Unoccupied Mode Time schedule for PIC is unoccupied. Machines will start
only when occupied.
Ready To Start In XX Min
Remote Contacts Open Remote contacts have stopped machine. Close contacts to
start.
Ready To Start In XX Min
Stop Command In
Effect
Chiller START/STOP on Status01 manually forced to stop.
Release value to start.
Ready To Start In XX Min
Recycle Restart Pend-
ing
Machine in recycle mode.
Ready To Start
Unoccupied Mode Time schedule for PIC is UNOCCUPIED. Machine will start
when occupied. Make sure the time and date have been
set on the Service menu.
Ready To Start
Remote Contacts Open Remote contacts have stopped machine. Close contacts to
start.
Ready To Start
Stop Command In
Effect
Chiller START/STOP on Status01 manually forced to stop.
Release value to start.
Ready To Start In XX Min
Remote Contacts
Closed
Machine timer counting down unit. Ready for start.
Ready To Start In XX Min
Occupied Mode Machine timer counting down unit. Ready for start.
Ready To Start
Remote Contacts
Closed
Machine timers complete, unit start will commence.
Ready To Start
Occupied Mode Machine timers complete, unit start will commence.
Startup Inhibited
Loadshed In Effect CCN loadshed module commanding chiller to stop.
Ready To Start In XX Min
Start Command In
Effect
Chiller START/STOP on Status01 has been manually
forced to start. Machine will start regardless of time sched-
ule or remote contact status.