Filter
Top Products
3261420005
INSTALLATION
This section covers unpacking and inspection, installing LOOSE-SHIPPED PARTS, selecting location, installing
Unit, preparing for operation, and operation.
UNPACKING AND INSPECTION
(see Figure 5)
NOTE: The Unit was thoroughly inspected before leaving the factory and the carrier has accepted and
signed for it. Any damage or irregularities should be noted at time of delivery (or not later than 15 days
from date of delivery) and immediately reported to the delivering carrier. Request a written inspection
report from Claims Inspector to substantiate any necessary claim. File claim with the delivering carrier,
not with IMI Cornelius Inc.
1. After Unit has been unpacked, remove shipping tape and other packing material.
2. Remove Unit sides, top and back panels as instructed.
3. Remove shipping bolts that secure Unit to skid, then remove skid.
4. Unpack LOOSE-SHIPPED PARTS. Make sure all items are present and in good condition.
Table 3. Loose-Shipped Parts
Item
No. Part No. Name Qty.
1 178025-100 Tapered Gasket, White 4
2 151689 Spanner Wrench, Flow Regulator 1
3 322859 Spanner Wrench, Dispensing Valve 1
4 325216 Cleaning Brush 1
5 311304 Tapered Gasket, Black 1
6 325982 Cup Rest 1
7 325983-039 Drip Tray 1
8 325986 Drip Tray Support 2
9 319941 Thread Cutting Screw, Hex Hd, No. 8-32 by 3/8-in. long 4
10 325666 Instructions, Scraper Blades 1
11 325458 Beater (item 13) 2
12 325457 Scraper Blade (item 2) 4
13 325984 Frame, Drip Tray 1
14 326002 Kit, Drip Tray Drain Hose (includes items 15-19) 1
15 170413 Drain Fitting 1
16 151281 Lockwasher, Internal Tooth 1
17 170423 Hex Nut, 5/8-32 1
18 140133 Drain Hose Clamp 1
19 113500-039 Drain Hose, 1/2-in. I.D. by 60-in. long 1
*Numbers in parentheses are in reference to items in Figure 3).
IDENTIFICATION OF LOOSE-SHIPPED PARTS
1. TAPERED GASKETS, WHITE (item 1) are used to seal connections when connecting Unit product inlet
lines to product tanks and connecting Unit CO
2
inlet line to CO
2
source.