Filter
Top Products
Model 500/600
This section provides troubleshooting information in the form of an easy
to read table.
If a problem occurs during the first operation of a new fryer, recheck
the Installation and Operation Sections of this manual.
To isolate a malfunction, proceed as follows:
1. Clearly define the problem (or symptom) and when it
occurs.
2. Locate the problem in the Troubleshooting table.
3. Review all possible causes. Then, one at a time work
through the list of corrections until the problem is solved.
4. Use the Diagnostic Mode to identify the problem and make
possible adjustments.
If a problem keeps reoccurring, have a qualified service technician
check the fryer for other causes.
303 5-1
SECTION 5. TROUBLESHOOTING
5-1. INTRODUCTION
5-2. TROUBLESHOOTING