Filter
Top Products
Model 500/600
D 1: Color Adjustment
This step lets the user make slight adjustments to the product color.
The first step of this item asks “IS PRODUCT COLOR OK?”
If product color is okay and no change is desired press or
to move on to the next item, or press to exit Diagnostic Mode.
If a change is desired, press (i.e. color is not okay). The
controller shows “ADJUST DARKNESS”, then displays the darkness
control slider:
“ LT - - - - - + - - - - - DK”
A blinking asterisk (*) indicates the current position. and
are used to adjust the darkness setting.
To make the product darker, press to move the blinking “ * “
toward the DK (darker) side.
To make the product lighter, press to move the blinking “ * “
toward the LT (lighter) side.
When done adjusting, press to exit and return to normal
operating mode.
Any temperature adjustment activated by the color adjustment feature
will be reflected in the normal setpoint display as part of the offset from
the basic product cook temperature. To view the present regulating
temperature, press twice.
In the example, “SETPT = 315°F + 6” the product cook temperature is
315°F and has an additional offset of 6°F to compensate for the age of
the oil, how long the fryer sits idle, and any color adjustments.
5-3. DIAGNOSTIC MODE
DETAILS (Continued)
803 5-11