Filter
Top Products
Model 500/600
The final item in D 10 identifies if any changes have been made to the
heat control settings. These settings affect the fryer’s heating algorithms,
and include the PC factors, rate-of-rise compensations, and heat pulse
cycle time, etc.
“10: ALL HC ITEMS” “10: 3 HC ITEMS”
“10: MATCH” “10: DO NOT MATCH”
“10: ORIG. VALUES” “10: ORIG. VALUES”
This historic information in this mode can be recorded and used for
operational and technical help.
Press and at the same time and “*INFO MODE*”
shows in the display, followed by “1. E-LOG”.
Press and hold to exit Information Mode at any time, or
after 2 minutes, controls automatically exit back to normal
operation.
1. E-LOG (error code log)
Press and “1A. (date & time) *NOW* shows in display. This
is the present date and time.
Press and if a error was recorded, “1B. (date, time, and error
code infromation)” shows in display. This is the latest error code that
the controls recorded.
Press and the next latest error code information can be seen. Up
to 10 error codes (1B to 1K) can be stored in the E-LOG section.
Press to continue to P-LOG.
2. P-LOG (power-up log)
Press and “2A. (date & time) *NOW* shows in display. This
is the present date and time.
Press and the latest power-up is shown, “2B. (date, time,)
PWR-UP”.
5-3. DIAGNOSTIC MODE
DETAILS (Continued)
5-4. INFORMATION MODE
DETAILS
5-26 303