Filter
Top Products
1.16 Caller ID Features
122 Feature Guide
<Modification Flowchart>
4. Displaying the Caller's Name
When a call containing Caller ID information is received, the PBX will search for the caller's name in the
following order, then show that name on the display.
1) The System Speed Dialling Table
2) The Caller ID information received from the telephone company
If a caller's name is not stored in the PBX or sent from the telephone company, it will not be displayed.
Conditions
[General]
• Hardware Requirement: An optional Caller ID card.
[Caller ID Display on SLT]
• Caller ID Display on SLT feature applies to:
Intercom calls and outside (CO) line calls.
Intercom calls include forwarded calls, calls from Transfer Recall and Hold Recall.
Outside (CO) line calls include calls directed to Uniform Call Distribution (UCD) or Direct Inward System
An outside (CO) line call containing
Caller ID information is received.
Yes No
Is the caller's area code stored in
the Caller ID Modification Table?
Modifies the number according to the
method programmed in the corresponding
"Local Call" field.
Example:
Removed number of digits: 3
Added number: blank
Example:
Received number:
Modified number:
201 555 1234
555 1234
Modification is complete.
Modified number is logged.
Modification is complete.
Modified number is logged.
Modifies the number according to the
method programmed in the "Long-distance
Call" field.
Example:
Removed number of digits: 0
Added number: 1
Example:
Received number:
Modified number:
313 555 1234
1 313 555 1234