Filter
Top Products
Feature Guide 5
Feature Highlights
Built-in Voice Message (BV) (Optional voice message card required)
Built-in Voice Message (BV) allows a caller to leave a voice message in a user's personal message area or
the PBX's common message area (
1.15.7 Built-in Voice Message (BV)).
Fixed Line SMS Terminal Support (Optional Caller ID card required)
The PBX can relay incoming calls from a Short Message Service (SMS) centre to specific single line
telephones (SLTs) that support SMS. Fixed Line SMS is a service that allows text messages to be sent and
received via Public Switched Telephone Network (PSTN) access. We recommend using SMS-enabled
Panasonic SLTs ( 1.17.3 Fixed Line SMS Terminal Support).
Caller ID Display on SLT (Optional Caller ID card required)
The PBX can receive Caller ID information (telephone numbers and callers' names) from calls received on
outside (CO) lines. This information can be shown on the displays of SLTs that support Caller ID as well as
proprietary telephones (PTs) when receiving calls (
1.16.1 Caller ID).
3-level Automated Attendant (AA)
3-level Automated Attendant (AA) service allows a caller to dial a single-digit number (Direct Inward System
Access [DISA] AA number) following the guidance of 3-level DISA outgoing messages (OGMs), and be
connected to the desired party automatically ( 1.15.6 Direct Inward System Access (DISA)).
PC Programming
System programming settings can be accessed using a PC and the Panasonic KX-TEA308 Maintenance
Console software as well as by using a PT ( 2.3.1 PC Programming).
The PBX software can be upgraded via the Serial Interface (RS-232C port) or USB port, using the KX-
TEA308 Maintenance Console software ( 2.3.7 Firmware Upgrade).
Automatic Configuration for Outside (CO) Line Type
The dialling mode of connected outside (CO) lines is automatically configured the first time the PBX is
accessed with a PC using the KX-TEA308 Maintenance Console software, or after the PBX data has been
cleared (
2.3.5 Automatic Configuration for Outside (CO) Line Type).
Advanced Hybrid System
This PBX supports the connection of PTs
*1
, Direct Station Selection (DSS) Consoles, and single line
devices such as SLTs, fax machines, wireless telephones, and data terminals.
*1
In this manual, "proprietary telephone" ("PT") means an analogue proprietary telephone (APT).