Filter
Top Products
2.2 System Configuration—Software
Feature Guide 169
2.2.4 Operator/Manager Features
Description
This PBX supports one operator and one manager. Any extension can be designated as the operator
through system programming ( Operator Assignment [008]). The operator is the destination of Operator
Call. The extension connected to extension jack 01 is the manager extension. An extension assigned as the
operator or manager extension is allowed to use certain features that most extensions cannot, as follows:
Feature Description
Manager
Password*
Details in
Manager
Programming
System Speed
Dialling Number
[001]
Sets the System Speed
Dialling number.
Required • 1.6.1.5 Speed
Dialling—
Personal/System
System Speed
Dialling Name
[011]
Sets the System Speed
Dialling name.
Required • 1.6.1.5 Speed
Dialling—
Personal/System
DISA Security
Code [512]
Sets the DISA security
code.
Required • 1.15.6 Direct
Inward System
Access (DISA)
DISA Security
Code Digits
[530]
Sets the number of digits for
the DISA security code.
Required • 1.15.6 Direct
Inward System
Access (DISA)
Call Log Printout
for Each
Extension
Prints and clears call logs
for each extension.
Required • 1.20.2 Call Log
Printout for Each
Extension
Extension
Password Set
Sets the extension
password. This password is
used for the Walking COS
feature and the Remote
Extension Lock feature.
Each extension's password
should be unique.
Required –
Remote Extension Lock Sets or cancels Extension
Lock on an extension
remotely.
Not required • 1.8.3 Extension
Lock
Time Service Switches the time service
mode manually.
Not required • 2.2.3 Time
Service
Remote Timed Reminder (Wake-up
Call)
Sets or cancels Timed
Reminder to any extension
remotely.
Not required • 1.21.2 Timed
Reminder
Incoming Call Log in the Common
Area—CLEAR ALL
Clears all Caller ID
information stored in the
common area.
Not required • 1.16.2 Incoming
Call Log