Filter
Top Products
1.22 Audible Tone Features
Feature Guide 159
1.22.2 Confirmation Tone
Description
At the end of a feature operation, the PBX confirms the success of the operation by sending a confirmation
tone to the extension user.
Conditions
• It is possible to eliminate confirmation tone 3 (except for Call Hold Retrieve with the Feature Number)
through system programming ( Call Pickup Tone [117], Conference Tone [105], External Pager
Access Tone [106]).
Feature Guide References
4.2.1 Tones/Ring Tones
Type Description
Tone 1 Sent when the setting is accepted, or sent when the Extension Lock feature is
set or cancelled.
Tone 2 Sent when the new setting is identical to the previous one, or sent when certain
features are successfully performed or accessed (e.g., Call Hold, Automatic
Callback Busy).
Tone 3 Sent before a conversation is established when accessing the following features:
•Call Pickup
• Call Hold Retrieve with the Feature Number
• Conference
• Paging/Paging Answer