Filter
Top Products
1.10 Conversation Features
Feature Guide 83
1.10.6 Flash/Recall
Description
A proprietary telephone (PT) user can use the FLASH/RECALL button to disconnect the current call and
start another call without hanging up. For example, if this button is used to disconnect an outside (CO) line,
the extension user will hear a new dial tone from the same outside (CO) line.
Conditions
• FLASH/RECALL Button Mode
One of the following modes can be selected through system programming ( Flash/Recall Key Mode
[110]):
a) MODE 1: EFA mode ( 1.10.7 External Feature Access (EFA))
An EFA signal is sent for the specified duration ( Flash/Recall Time [418]).
b) MODE 2: Flash/Recall mode
A flash/recall signal is sent when the FLASH/RECALL button is pressed if the length of time that
the button is pressed is longer than the specified duration ( Flash/Recall Time [418]). If the
length of time that the button is pressed is shorter than the specified duration, an EFA signal will
be sent for the specified duration.
• This feature functions only if the FLASH/RECALL button is set to "MODE 2: Flash/Recall mode".
• Disconnect Time
The amount of time between successive accesses to the same outside (CO) line is programmable for
each outside (CO) line ( Disconnect Time [422]).
• Pressing the FLASH/RECALL button restarts the conversation duration, outputs an SMDR call record
( 1.20.1 Station Message Detail Recording (SMDR)) and checks the Toll Restriction (TRS) class of
service (COS) number again. The notation "F/" will be logged along with the new dial number on SMDR.