Filter
Top Products
3.3 PT Programming
208 Feature Guide
Redialling after Pulse to Tone Conversion [119]
Feature & Programming References
1.5.2.4 Dial Type Selection
Bell Frequency [120]
Note
This programme selects the bell frequency sent to an SLT.
Automatic Line Access [121]
Note
* For New Zealand: 1 or 9
Feature & Programming References
1.5.3.3 Outside (CO) Line Access
2.2.4 Operator/Manager Features
Automatic Rotation for CO Line Access [122]
Feature & Programming References
1.5.3.3 Outside (CO) Line Access
Break Ratio [123]
Note
This programme selects the pulse break ratio (the ratio between the length of the pulse and the length
of the pause) when a pulse is sent to the telephone company while dialling a telephone number.
1 1 9
NEXT
SELECT
STORE END
(Enable/Disable)
1 2 0
NEXT
SELECT
STORE END
(20/25 Hz)
1 2 1
NEXT
SELECT
STORE END
(Dial 0/9)*
1 2 2
NEXT
SELECT
STORE END
(Enable/Disable)
1 2 3
NEXT
SELECT
STORE END
(MODE1: 66 %/
MODE2: 60 %)