Alto-Shaam 1020 Oven User Manual


 
Cleaning and Maintenance
124.
S M A R T C L E A N
A U T O M AT I C C L E A N I N G P R O G R A M
With the oven power on
PRESS THE CHEF FUNCTION KEY.
Rotate the adjustment knob
until the Clean symbol is
highlighted in the display.
PRESS THE CHEF FUNCTION KEY.
THE CONTROL WILL ASK FOR
VERIFICATION FOR A SERIES OF ITEMS
BEFORE THE CLEANING FUNCTION CAN BE
STARTED
:
Verify water is supplied to the oven and press
the up
and down
arrow keys or rotate
the adjustment knob to select “YES”.
PRESS THE CHEF FUNCTION KEY.
Press the up
and down
arrow keys or
rotate the adjustment knob to make the
appropriate selection.
PRESS THE CHEF FUNCTION KEY.
If "Yes" is selected, the oven will begin a 20
minute rinse cycle. Display will count down
indicating time remaining in the rinse cycle.
If "No" is selected, the display will indicate a
choice of Cleaning levels.
Press the up
and down
arrow keys or
rotate the adjustment knob to make the
appropriate selection.
PRESS THE CHEF FUNCTION KEY.
If "Heavy Cleaning" is selected:
If "Normal Cleaning" is selected:
Wearing rubber gloves, remove drain screen at
bottom of oven and place the approriate
number of cleaning packets in drain opening.
Replace drain screen. Press the up
and
down
arrow keys or rotate the adjustment
knob to select “YES”.
PRESS THE CHEF FUNCTION KEY.
Rinse Only?
Heavy Normal
Cleaning Cleaning?
Insert 3 Cleaner Solution
Insert 2 Cleaner Solution
C l e a n i n g a n d M a i n t e n a n c e
Water Turned On?
STANDARD CONTROL
DELUXE CONTROL
R
emove all food scraps and
r
esidue from the oven drain.
R
emove shelves, side racks
a
nd pans and wash separately.
Easy to use Combitherm tablets, Combitherm spray cleaner or
a combination of both may be used in this cleaning program.
RUBBER GLOVES MUST BE WORN
W
HEN USING THE OVEN CLEANER
.