Alto-Shaam 1020 Oven User Manual


 
Cleaning and Maintenance
126.
S M A R T C L E A N
A UTO MAT IC CL EA NI NG P RO GR AM
R
emove all food scraps and residue from the
oven drain. Remove shelves, side racks and pans
and wash separately.
Wearing rubber gloves, remove drain screen at
bottom of oven and place 3-4 cleaning packets in
drain opening. Replace drain screen.
With the oven power ON,
rotate the Cooking Mode dial to the
Cleaning mode position.
“CLN” will appear in the display.
After 1 minute “135” will appear in the display
indicating a 135 minute cleaning cycle.
THE OVEN WILL BEGIN A 135 MINUTE
CLEANING AND RINSE CYCLE.
DISPLAY WILL COUNT DOWN INDICATING
TIME REMAINING IN THE CLEANING CYCLE.
A
t the end of the SmartClean function, the oven will
beep and the display will indicate “FIN."
After 3 minutes, beeping will stop. Display will
contine to indicate cleaning finished. Turn the
Cooking Mode dial to the OFF position.
FORCED RINSING MODE:
If the cleaning cycle is stopped after 10 minutes in the
cleaning cycle, the unit will immediately go into a
Forced Rinsing mode and display “RIN” for 5 minutes.
If power is lost or the unit is turned off during
cleaning, the unit will go into a Forced Rinsing mode
when power is restored, or unit is turned back on.
After a period of 5 minutes “FIN” will appear in
the display.
F I N
F I N
C L N
1 3 5
C l e a n i n g a n d M a i n t e n a n c e
L E AV E D O O R S L I G H T LY O P E N A F T E R C L E A N I N G
C O N T R O L
O P T I O N
R I N