Filter
Top Products
10
Breadmaker Owner’s Manual
Use the Custom Recipe Program to change the settings on any of the
pre-programmed baking cycles. The Personal Recipe Program allows you to
program the Breadmaker to prepare your favorite bread recipes. You can store
5 personal recipes in the Breadmaker’s recipe database.
The Bake Only cycle allows you to bake frozen dough or dough that needs
refrigeration as well as breads that need additional baking, up to 2 hours.
Before First Use
1. Unpack the Breadmaker. Save the packing material and carton in case of future
need.
2. Place the Breadmaker on a firm, level surface. Do not place it where it will come
into contact with heat or moisture. Make sure the vents are not blocked.
3. Plug the power cord into a polarized outlet (one blade is wider than the other). Do
not allow the cord to dangle over the edge of the counter.
4. Wash the bread pan and the kneading paddle in warm soapy water. Dry.
If your Breadmaker will be part of a Home Hub network, program your Home Code
(For instructions on programming your Home Code, please refer to page 14.
5. Programming Your Home Code on page 14). Once your Breadmaker is on the
Home Hub network, the time and date will be set and maintained automatically.
6. If your Breadmaker is not on a Home Hub network, set the clock and date (For
instructions on setting the clock, please refer to Manually Setting the Clock and
Date on page 15).
Note: During first use the Breadmaker may smoke or emit an odor. This is caused by oils used
in the manufacturing process. To burn off the oils, operate the Breadmaker empty using the
White Rapid Program.