Filter
Top Products
23
Using Beyond Breadmaker’s Special Features
Using the Beyond Breadmaker’s Special
Features
Delay Bake Timer
You can pre-program your Beyond Breadmaker to start baking automatically up to 24-hours in
advance. That way, fresh bread can be waiting for you when you get home from work or when
you get up in the morning.
Note: Don’t use the Delay Bake Timer if your recipe includes eggs, fresh milk, or other dairy
products, meats, fish, etc. that may spoil.
To set the Delay Bake Timer:
1. Add the ingredients as usual, taking care not to let the yeast or other leavening
ingredient and liquid ingredients contact one another.
2. If your recipe contains salt, add salt with liquid ingredients, keeping it away from
the yeast.
3. Close the Breadmaker lid.
4. Select the baking cycle, loaf size and crust option you want. The time needed for
the selected baking cycle appears in the display.
5. Press the button once for each 10 minutes you want to delay the completion of
baking. (Use the button to decrease time in 10-minute increments.) Once you
have pressed the UP or DOWN buttons, the time of day for the end of the baking
cycle will be displayed. To fast forward time, press and hold the button. To fast
reverse, press and hold the button.
Example
If it is currently 8:00 am and you want a 1.5 lb loaf of whole wheat, medium crust bread to be
ready in 5 hours, at 1:00 pm:
1. Select Whole Wheat, 1.5 lb, medium crust. The pre-programmed cycle time, 3:35
appears on the display.
2. Press the button 5 times (the time display will read 1:00, meaning the bread will
be finished in 5 hours at 1:00 pm.
Note: Actual baking times will not change.
3. Press START to begin the timer. The colon (:) in the time displayed begins to flash,
letting you know the timer is started. The timer will count down to 0:00, and the
Breadmaker will beep to let you know baking is complete. If you have programmed
a delayed start, the display will show the current time until the breadmaking cycle
has started, then it will show the remaining time in the breadmaking cycle.
4. If you make an error after you’ve activated the cycle and want to start over, press
and hold STOP/RESET. The timer will clear and you can begin again.