Filter
Top Products
13
Control Panel
Program
Time / Temp
The Program function allows you to customize the standard
baking cycles by modifying a baking cycle’s pre-set times for
kneading, rising and so on. Please refer to “Programming Your
Personal Recipes” beginning on page 26 for instructions on using
the Program function.
Save/Erase Press to save or erase changes made when using the Program
function.
Press to increase/decrease the amount of time. Time increases/
decreases in 10-minute increments.
HC Press to enter your home code if your Breadmaker is on a Home
Hub network. Please refer to Programming Your Home Code
beginning on page 14.
Crust Control Press to customize the crust color and texture. The options are
Light, Medium, Dark. The default setting is Medium. Crust options
are listed on the left side of the display. Your current selection is
indicated with a .
Extras Use the Extras function when programming recipes that call for
fruit, nuts, chopped garlic or similar ingredients to be added to
the bread dough during baking.
Select Press to select the desired Breadmaker cycle. Cycle options are
listed on the right side of the display window. Your current
selection is indicated with a .
SCAN Press to use the scanning wand. Your Breadmaker has hundreds
of baking cycles stored in its memory. If you are baking a pack-
aged bread, cake or muffin mix, just scan the package barcode
to have your Breadmaker program itself for perfect results. For
instructions on using the scanning wand, please refer to “Using
the Scanning Wand” on page 15.
LEARN Press to use the Learn function. The Learn function is used in
conjunction with the scan function. If you scan the bar code
on a package bread, cake or muffin mix and the message
NOT IN MEMORY appears in the display, you can “teach” your
Breadmaker to prepare the mix using the Learn function. Please
refer to page 17 for instructions on using the Learn function.
Loaf Size Press to select loaf size. The options are 1 LB, 1.5 LB, 2 LB.
Pause Press to temporarily interrupt the current cycle. Please refer to
“Using the Pause Feature” beginning on page 24.
START Press START to begin a baking program and to start the timer.
STOP / Reset Press for a full second to reset the baking cycle’s Delay Bake
setting or to cancel the program in progress.