Filter
Top Products
17
Using the Learn Function
Your Breadmaker saves a list of all unrecognized barcodes. If your Breadmaker is on a Home
Hub network, the Home Hub will update the Breadmaker’s database at least once each day
(depending on what type of Internet connection you have).
Your Breadmaker will now be able to recognize the barcode and program itself with the proper
cooking instructions.
Using the Learn Function
When you scan a barcode that’s not already in the Breadmaker’s database, the message NOT IN
MEMORY appears on the display. If this happens, you can use the Breadmaker’s Learn function
to manually enter and save the baking program to the Breadmaker’s database. The next time
you swipe the barcode, the Breadmaker will program itself to prepare the mix according to the
instructions you entered.
Adding a New Baking Program to the Breadmaker’s Memory:
1. Press SCAN. The red light at the end of the scanning wand will illuminate. Scan the
barcode on the package. (Please refer to Figure 3 for scanning procedure.) When
the message NOT IN MEMORY flashes in the display. Press LEARN within 3 seconds.
2. “CUSTOM PROGRAM” will appear in the display. Enter the times and temperature
required to prepare the mix. Please refer to the instructions in “Customizing Pre-
Programmed Baking Cycles” on page 25.
3. When you’re finished entering the baking program, press LEARN again to store the
program in the Breadmaker’s memory.
The next time you scan another package of the same mix, the Breadmaker will recognize the
barcode and automatically program itself to cook the food according to the instructions that
you entered.
Using the Learn Function to Customize Cooking Programs
You may also use the Learn function to tailor the Breadmaker’s pre-programmed baking cycles
to your individual preferences. Instructions that you manually enter using the Learn function
take priority over pre-programmed cooking instructions.