Filter
Top Products
15
Manually Setting the Clock and Date
Manually Setting the Clock and Date
If you do not have a Home Hub follow these steps to set the Breadmaker’s
time and date manually:
1. Unplug the Breadmaker and plug it back in. The unit will emit a long beep and
“LOAD” will be displayed, flash for a few seconds, automatically change to “CONN”,
flash for a few seconds, before displaying clock digits reading 00:00. The clock dig-
its will read 00:00. In a few seconds the clock digits will flash 12:00. Press
or
to increase or decrease the hour until the desired hour is displayed. Press SELECT.
2. The minute digits will flash. Press
or to increase or decrease the minutes until
the desired minute is displayed. Press SELECT.
3. The month digits will flash. Press
or until the desired month is displayed.
Press SELECT.
4. The day digits will flash. Press
or until the desired day is displayed. Press
SELECT.
5. The year digits will flash. Press
or until the desired year is displayed. Press
STOP/Reset to save your settings.
Note: To use the Beyond Breadmaker’s smart features you must have a Home Hub and a
Beyond Information Service.
Preparing your favorite packaged mixes for yeast breads, batter breads and cakes is easy, fast
and convenient thanks to your Beyond Breadmaker’s smart features. Your Breadmaker is pro-
grammed to recognize the barcodes of hundreds packaged bakery mixes. With a swipe of the
scanning wand your Breadmaker will automatically program itself to perfectly prepare your
packaged mix.
If your Breadmaker is on a Home Hub network, you can log onto your Beyond Information
Service from your personal computer to select baking programs to be downloaded to your
Breadmaker and you can program your favorite homemade bread recipes.
Using the Scanning Wand
Your Beyond Breadmaker is equipped with a UPC scanning wand that is similar to scanning
equipment used in many retail settings. The scanning wand on your Beyond Breadmaker is
like having a “magic” wand that tells your Breadmaker to automatically program itself for
the perfect baking cycle for your packaged bakery mix.
To use the scanning wand:
1. Locate the barcode on the packaged mix you wish to prepare. On the
Breadmaker’s control panel, press SCAN. A red light will come on in the end of the
scanning wand.
4. Using Your Beyond Breadmaker
Smart Features