Filter
Top Products
16
Breadmaker Owner’s Manual
2. Hold the scanning wand as you would hold a pencil. Touch the lighted end of the
wand against the package and to the left of the barcode.
3. Using a steady sweeping motion, move the wand across the bar code from left to
right and from right to left at a medium to fast speed. Be sure to scan the entire
barcode and to keep the wand tip touching the package. A beep tells you that the
barcode was scanned successfully.
Figure 3. Scan the entire from barcode beginning outside the left edge
If the Breadmaker finds the barcode in its database:
If the Breadmaker finds the barcode in its database, it will automatically program itself for the
correct baking cycle.
To complete baking:
1. Place the mix in the bread pan (the kneading paddle must already be in the bread
pan). Follow package directions for adding other ingredients.
2. Place the bread pan in the Breadmaker. Make sure the pan is seated properly in the
baking chamber (it will snap into place). Close the lid and press START.
3. At the end of the cooking time, the Breadmaker will beep to let you know baking
is completed.
4. Using oven mitts, remove the bread pan from the baking chamber. Follow package
directions for cooling and removing the baked goods from the bread pan.
If the Breadmaker does NOT find the barcode in its database:
If the Breadmaker does not find the barcode in its database, the Breadmaker will beep and the
message NOT IN MEMORY will appear on the display.
To modify the times/temperatures in a standard baking cycle, please refer to “Customizing
Pre-Programmed Baking Cycles” on page 25.
Why Does NOT IN MEMORY Appear in the Display?
Your Beyond Breadmaker comes pre-programmed with hundreds of recipes for preparing
national brand bakery mixes. However, your Breadmaker may not recognize the barcodes for
regional, private label, in-store, or distributor brands.