Filter
Top Products
23
WOLF DUAL FUEL RANGE OVEN OPERATION
SELF-CLEAN
MODE
How self-clean mode works:
The oven is
heated in graduated steps to a preset high
temperature. During this process, food soil is
burned off, leaving some white ash residue.
Set in combination with
delayed start feature
,
cleaning the oven can be programmed to start
and stop while you sleep. Refer to
delayed
start feature
on page 21.
For safety purposes, the door automatically
locks during cleaning and unlocks when the
cavity has cooled completely. Should you
change your mind and stop the mode after
beginning
self-clean mode
, the door will still
remain locked until the temperature inside has
cooled to below 150˚C.
IMPORTANT NOTE:
Remove all oven racks
and rack guides before using the
self-clean
mode
. They will discolor if left in the oven
during this feature. Refer to oven racks and
rack guides on page 14.
When hand cleaning a spot, use only mild
abrasive cleaners or plastic scrubbers.
IMPORTANT NOTE:
Do not allow food with
high sugar or acid content, such as fruit juice,
milk and tomatoes, to remain on the porcelain
enamel surface. Wipe up immediately with a
dry towel. Failure to do so may cause a perma-
nent dull spot.
IMPORTANT NOTE:
Never use oven cleaners.
They are not necessary with
self-clean mode
.
IMPORTANT NOTE:
For ranges with two
ovens, only one oven may be in
self-clean
mode
at a time and the other oven cannot be
used for cooking. If the user tries to use the
opposite oven while an oven is in
self-clean
mode
, the word ”
OPP
” will be displayed in
the oven selector knob.
SETTING CONTROLS
For time bake in Sabbath feature:
1)
Add food to the oven.
2)
Turn oven selector knob bezel to either
or . Change the preset temperature if
needed.
3)
Open hidden control panel by pressing in
on the flame symbol on the front of the
panel.
4)
Touch . Use the or arrows on the
hidden control panel to increase the desired
end time.
5)
Touch . Use the or arrows on the
hidden control panel to increase or
decrease the desired amount of cooking
time.
6)
Touch and hold on hidden control panel
for 5 seconds. ”
SAb
” will be displayed in
the oven selector knob. No sound will be
heard; only the display will flash.
7)
The oven will turn itself off.
8)
Remove food. Always use dry pot holders
when removing hot pans from the oven.
9)
Turn oven selector knob bezel to to end
this feature.
SABBATH FEATURE
Star-K Certified
How the Sabbath feature works:
This mode
allows for baking or keeping food warm while
still adhering to the ”no work” requirements
on religious Sabbath days.
How time bake in Sabbath feature works:
This feature allows for baking food in the oven
on the Sabbath and then the oven automati-
cally turns itself off when finished. No sound
will be heard when finished; only the elec-
tronic control panel display will flash. Use this
feature only in the
bake
and
roast modes
.
On holidays, temperatures may be adjusted
but the display will remain unchanged.
SETTING CONTROLS
For Sabbath feature:
1)
Turn oven selector knob bezel to either
or . Change the preset temperature if
needed.
2)
Touch to turn oven lights on or off.
3)
Touch and hold on hidden control panel
for 5 seconds.
4)
Turn oven selector knob to to end this
feature. Oven remains on until this mode is
cancelled.
Sabbath feature setting.
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
During self-clean mode, exterior surfaces
may get hotter than usual, therefore,
children should be kept away.
CHANGING OVEN TEMPERATURE
To raise oven temperature during Sabbath
feature:
Turn oven selector knob bezel to the
right and release; each twist raises the temper-
ature 10 degrees. The oven temperature will
rise randomly after user is finished setting the
new temperature. There will be no clicking,
lights or signs of the oven change.
To lower oven temperature during Sabbath
feature:
Turn oven selector knob bezel to the
left and release; each twist lowers the temper-
ature 10 degrees. The oven temperature will
rise randomly after user is finished setting the
new temperature. There will be no clicking,
lights or other signs of the oven change.
Turn the oven selector knob to to end this
feature. The oven remains on until this mode
is cancelled.