Filter
Top Products
Start time / Finish
You can delay the start of a programme. The oven will then
switch on automatically.
Delay start cannot be used for running the descaling
programme.
Use "Start at" to enter the time of day at which you want the
programme to start. Use "Ready at" to enter the time of day at
which you want the programme to end.
The difference between the Start time and Finish time is used
to calculate the cooking duration. The heating-up time
required is automatically calculated by the steam oven.
If the temperature in the oven is too high, e. g. just after
another programme, you will not be able to use this
function. "Start at" and "Ready at" will not appear in the
display if this is the case.
Open the oven door until the appliance has cooled down.
Cooking results can be impaired if there is a long delay
between the food being placed in the oven and the start of
cooking.
Fresh food can change its colour and even deteriorate.
Entering settings
^
Select the function, temperature and duration as normal.
^
Touch X.
^
Select "Start at" or "Ready at".
^
Set the time of day when you want to programme to start or
finish.
^
Confirm with "OK".
Additional functions
36