Filter
Top Products
6.6 Mail Function
6.6.3 How to set up the mail function
6 - 16
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SCREEN
CONFIGURATION
5
OPERATING
METHOD
6
FUNCTIONS
7
INTERNAL DEVICE
INTERFACE
FUNCTION
8
TROUBLESHOOTING
APPENDICES
2 Mail Condition
Set the mail send conditions.
If the mail transmission is set with GT SoftGOT1000, it is possible to set not to send e-mail for certain
functions without modifying the monitor screen data.
Disable the functions for which e-mail is not to be sent.
(Check boxes are enabled by default.)
1 Perform the following operation.
• Click (Mail Condition).
• Select [Set] [Mail Setup] [Mail Condition] from the menu.
• Right-click the mouse to select [Set] [Mail Condition].
2 The Mail Condition dialog box is displayed.
Precautions for setting mail conditions
If the mail function is not set by Alarm history display function, this setting is ignored
for that function (e-mail is not sent even if the check boxes are checked).
Refer to the GT Designer2 Version Screen Design Manual for how to set objects.
Item Description
Mail Condition Set whether the mail function will be used or not with each function.
Alarm History Turn on this checkbox to use the alarm history display function with the mail function.
System Alarm
Turn on this checkbox to use the system alarm with the mail function.
After turning it on, set the transmission interval (10 to 120 minutes) for the case where the same error occurs two
or more times in a row.
Example: When the error transmission interval is set to 15 minutes
If the same system alarm occurs again
within the time set as the transmission
interval, e-mail will not be sent at and
after the second time.
If a different system alarm occurs within
the time set as the transmission interval,
e-mail will be sent.
System alarm 1)
In 5 minutes
GT SoftGOT1000
System alarm 1)
Personal
computer
System alarm 1)
System alarm 1)
In 5 minutes
GT SoftGOT1000
System alarm 2)
Personal
computer
System alarm 1)
System alarm 2)