Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
November, 2002 Page - 82 6700001
TEST THE AIR COMPRESSOR
1. Press , then press until the display shows
AIR TEST.
2. Press to test the air compressor.
NOTE
If the brewer is in the BREW position at the start of
this test, the compressor runs for 18 seconds. This
allows you to evacuate a full brewer barrel. Other-
wise, it runs for 2 seconds.
3. CONTINUE.
TEST THE BREWER
1. Press , then press until the display shows
BREW TEST.
2. Press to test each brewer position:
WARNING
Keep away from the brewer mechanism while it is
operating. Coming into contact with moving parts
could injure you.
a. BREW 'R BREW The brewer is in the BREW position.
b. BREW 'R FLIP The brewer is in the FLIP position.
c. BREW 'R HOME The brewer is in the HOME position.
3. CONTINUE.