Crane Merchandising Systems 670 Hot Beverage Maker User Manual


 
HOT DRINK SETUP/PROGRAMMING GUIDE
November, 2002 Page - xi 6700001
CONTROLS AND INDICATORS
POWER PANEL. You may have one of three power panels, depending upon where you
live. The controls are fundamentally the same, however.
Circuit Breakers. Circuit breakers protect the merchandiser against failures in the power
supply or any of the electrical components. If a circuit breaker trips and cannot be reset,
consult your troubleshooting manual.
Back Side of U.S./ Canada Power Control Panel. The circuit board mounted on the rear
of the U.S. and Canadian power control panel is a dc power supply for the coin
mechanism. A fuse protects the board circuitry in the event of a coin mechanism solenoid
failure. If the coin mechanism is not working, check this fuse. If the fuse is blown, a bad
coin mechanism solenoid could be at fault.
Main Power Switch. This is the main ON/OFF switch for the merchandiser.
WARNING
To protect against electrical shocks and possible damage to the
machine, turn this switch OFF when performing any mainte-
nance on the merchandiser.
LABEL
MAIN
POWER
SWITCH
ELECTRONICS
BREAKER
O
I
626P0005
CONTROLS AND INDICATORS