Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
6700001 Page - 11 November, 2002
1. On the maintenance keypad, press , then press until the
display shows
BREW TEST.
2. Press to test each brewer position:
WARNING
Keep away from the brewer mechanism while it is operating.
Coming into contact with moving parts could injure you.
BREW 'R BREW The brewer is in the BREW position.
BREW 'R FLIP The brewer is in the FLIP position.
BREW 'R HOME The brewer is in the HOME position.
3. Make sure the filter paper feeds properly without jamming.
4. Replace the cup station and grounds bucket.
5. Install the Optional Coin Box Lock
a. Install the lock cylinder, washer, and nut in
the order shown.
b. Tighten the nut.
c. Install the lock bar as shown,
and secure with the screw.
LOCK BAR
SCREW
NUT
WASHER
LOCK
CYLINDER