Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
6700001 Page - 29 November, 2002
THE SUPERVISOR MODE
GAIN ACCESS TO THE SUPERVISOR MODE
1. Press . The display shows: ENTER CODE. You must
enter the four-digit supervisor code within 6 seconds to gain
access.
NOTE
A new machine has a factory-set supervisor code of
0000.
When you have entered the right code, you will hear two beeps
and see UNLOCKED in the display.
ENTER A NEW SUPERVISOR CODE
1. Follow the steps in GAIN ACCESS TO THE SUPERVISOR
MODE.
2. Press , then until the display shows SUPER XXXX.
The X's represent the current supervisor code. Use the number keys
to enter a new code.
IMPORTANT!
If you enter a new code, be sure to keep a written
record of it. There is no other way to access the
SUPERVISOR mode.
3. CONTINUE.
ENTER A FREEVEND CODE
1. Follow the steps in GAIN ACCESS TO THE SUPERVISOR
MODE.
2. Press until the display shows FREE XXXX.
The X'sreresent the current freevend code. Use the number keys to
enter a new code. If the code is anything other than "0000", it must
be entered after the key lock is turned in order to enable free vends.
3. CONTINUE