Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
November, 2002 Page - 48 6700001
SET THE BOWL RINSE TIME
Mixing bowl(s) can be automatically rinsed by one of two methods: You
can specify a set time of day when the bowl is rinsed, or you can specify
that rinsing takes place a set time after the last selection is vended.1.
Press then until the display shows one of the following:
RIN.HRS 2.5 - This is how soon the machine rinses the bowls after a
vend. In this example, bowl rinse takes place 2.5 hours after the last
vend. Range: 2.0 - 12.5 hours, in .1 hour (6 minute) increments.
-or-
RIN.TIM 4.5 - The time of day (in hours and tenths of hours) the machine
rinses the bowls. In this example, bowl rinse takes place at 4:30 am.
Range: 0.0 - 23.9 in .1 hour (6 minute) increments.
NOTE:
If 24 hours passes without a vend, no rinsing will take
place. This eliminates unnecessary rinsing over a
weekend or holiday.
-or-
RINSE OFF - No bowl rinse takes place.
2. Press to switch between these options, and the number keys
to enter new values.
3. Continue.
TURN POSIVEND™ ON OR OFF
1. Press then until the display shows one of the
following:
POSI.V OFF: None of the PosiVend™ functions are available. Use this if
the PosiVend™ system is not installed, or there is some reason you
do not want to use it (for example in a high cup theft situation).
POSI.V ON. The PosiVend™ system is operative. All of the PosiVend™
functions are available.
2. Press to switch between the two choices.
3. Continue.