Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
November, 2002 Page - 90 6700001
RINSE THE BREWER
WARNING
Very hot water will be dispensed in this test. Com-
ing into contact with hot water will HURT!
1. Press , then press until the display shows
BREW RINSE.
2. Press to rinse the brewer. The brewer cycles, and
RINSING is displayed.
3. CONTINUE.
FILL THE TANK
1. Press , then press until the display shows
TANK.FILL.
2. Press . This clears any tank error and starts filling the
tank, if necessary.
NOTE
If it is taking a long time to fill the tank AND THERE ARE
NO LEAKS, you may see TANK ERR in the diagnostic
list again.
Just press again after making sure there are no
other problems, such as a restriction in the water inlet
line or a clogged water filter.
3. CONTINUE.