Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
November, 2002 Page - 96 6700001
MECH COMM Incomplete coin mech communications
check harness.
MECH.SENSOR Coin mech reporting a bad tube sensor
replace mech.
MECH ROM Replace the coin mechanism.
MECH.ACCEPT Coin mechanism acceptor section is
unplugged from the main body of the
coin mech. Connect the cable and cycle
machine power OFF and then ON.
MECH JAM One or more coin tubes are jammed.
Pay a coin from each tube until the jam
is cleared.
DEBIT CARD Card reader reporting error — machine
will not operate if configured for DEBIT
ONLY.
CHECK DBV Bill validator reporting error — machine
will not operate. Empty stacker, clear
jams, etc.
DBV COMM Incomplete bill validator
communications — check harness.
DBV MOTOR One of the motors has failed. The unit
will disable itself until the error is
corrected. Check for bill stuck in the
acceptance path. If no bill is present,
replace the validator. Cycle machine
power OFF and then ON.
DBV SENSOR One of the sensors in the bill validator
has failed. The unit will disable itself
until the error is corrected. Check for
bill stuck in the acceptance path. If no
bill is present, replace the validator.
Cycle machine power OFF and then ON.