Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
6700001 Page - 37 November, 2002
• For example, enter 1.00. Therefore, the machine will take a dol-
lar bill or coin even though there is less than $1.00's worth of
change. Entering 5.00 tells the machine to take a five even
though there is less than $5.00's worth of change, and so forth.
NOTE:
This could cause a customer to be shortchanged.
• Entering 0.00 means that bills or coins will only be accepted if
there is enough change to cover them.
b. The value of "X.XX" tells the machine how much the customer
is allowed to overbuy a product. The customer will be short-
changed when an overbuy occurs.
Example:
For a value of $0.25: if there is no change in the machine
and the customer inserts a $1.00 bill. The customer can pur-
chase a product for $0.75 even though the change cannot be
paid back. The customer will be shortchanged. Normally a
purchase will not be approved unless all change can be paid.
Entering 0.00 means that the vend will only be approved
when the correct change can be returned (overbuy disabled).
3. CONTINUE
SELECT CARD READER AND OPTIONS
1. Press , then press until the current card reader is
shown in the display. Press to choose the desired card
reader. Your choices are: NO CARD, DUMB CARD, or
MDB CARD.
2. Press until one of the following is displayed:
REVALUE.ON - Allows credit to be transferred onto the card
REVALUE.OFF - Credit cannot be transferred to the card
Press to display the desired choice.
3. CONTINUE