Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
6700001 Page - 95 November, 2002
KEYSWITCH The keyswitch input is active and configured as
an inhibit.
MACH.TYPE 0 Machine type error displays machine type
screen. NOTE: This is the actual machine type
screen. You may enter the correct machine type
number directly on this screen without further
action.
D+J+WXYZ Configuration error; displays the machine
configuration screen. NOTE: this is the actual
config screen. You may enter the correct config
number directly on this screen without further
action.(Verify cup size and product times in the
product configuration
screen).
TANK ERR Tank failed to fill or refill.
RING 1, 2 The cup ring is jammed.
MTR 1A1B2X Cup turrets are jammed.
NO CUPS 1, 2 Out of cups.
BREW JAM The brewer is jammed.
WASTE PAIL The waste pail is full.
LOW WATER The water level in the tank is low.
COLD WATER Water in the tank is too cold to vend.
NO SENSOR Temperature sensor failed or missing.
NO FLOAT Float sensor failed or missing.
WHIP 1 2 3 4 5 Whipper motor failure (motor 1, 2, 3, 4,
5)
DOOR JAM The automatic delivery door is jammed.
NO MECH Coin mech not detected - machine will
not operate if configured for coin mech