Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
6700001 Page - 45 November, 2002
SET UP LOW TEMPERATURE DISPENSING
1. Press then press until the screen displays either
LTDIS OFF. This causes the machine to operate the same as the previ-
ous Hot Drink Center. For example, with a setpoint temperature of 202º F
the machine will inhibit vending when the water tank temperature reaches
182º F.
-or-
LTDIS ON. Allows vending to a water tank temperature of 140º F.
2. Press to change between ON and OFF.
3. Continue.
SET UP LOW POWER SETTINGS
Low power settings allow for the water tank to be set to a lower temperature
at up to 4 different dates and times. For example, you want to lower the tank
temperature to 160º F overnight on Mondays through Fridays. The machine
tank temperature setpoint will be changed to 160º F at 6:00 pm and maintained
at that temperature until 5:00 am on the following morning when the setpoint
is returned to 202º F. Please keep in mind that at 5:00, the machine will just
begin to increase to the 202º F setpoint temperature. It is up to you to
determine how long that will take and to allow enough time for the tank to be
at its proper temperature when the machine will be used. Typically, one hour
is adequate to return to the normal operating temperature.
NOTE:
The machine OUT OF SERVICE condition during the low power interval will
be determined by how you have set the LTDIS configuration.
(Continued)