Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
November, 2002 Page - 36 6700001
Press to display the desired choice.
The value of "X.XX" has two purposes:
a. The value of "X.XX" tells the machine how big a bill or coin
to accept even though there is not enough change in the coin
mech to cover all possible paybacks.
• For example, enter 1.00. Therefore, the machine will take a
dollar bill or coin even though there is less than $1.00's worth
of change. Entering 5.00 tells the machine to take a five even
though there is less than $5.00's worth of change, and so forth.
NOTE:
This could cause a customer to be shortchanged.
• Entering 0.00 means that bills or coins will only be accepted if
there is enough change to cover them.
b. The value of "X.XX" tells the machine how much the custom-
er is allowed to overbuy a product. The customer will be
shortchanged when an overbuy occurs.
Example:
For a value of $0.25: if there is no change in the machine
and the customer inserts a $1.00 bill. The customer can pur-
chase a product for $0.75 even though the change cannot be
paid back. The customer will be shortchanged. Normally a
purchase will not be approved unless all change can be paid.
Entering 0.00 means that the vend will only be approved
when the correct change can be returned (overbuy disabled).
(Continued)