Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
6700001 Page - 51 November, 2002
VIEW TIMES NO CUP WAS DETECTED AFTER A CUP
RING CYCLED
(NOT SHOWN IF ZERO)
1. Press , then press until the display shows PV.FL1
XX. XX represents the number of times a cup was not detected after
ring 1 cycled. Check the cup ring adjustment (see the Operator’s
Guide), or the cup stack for damage if the count is excessive.
2. Press to clear the count.
3. Press until the display shows PV.FL2 XX. XX represents the number
of times a cup was not detected after ring 2 cycled. Check the cup ring
adjustment (see the Operator’s Guide), or the cup stack for damage if
the count is excessive.
4. Continue.
VIEW HOME SWITCH USAGE RELATED TO POSIVEND™
(NOT SHOWN IF ZERO)
1. Press , then press until the display shows WO.PV XX.
XX represents the number of times home switches were used due to
OPT’N POSI.V selected but not working.
2. Continue.