Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
November, 2002 Page - 76 6700001
(You can also press to scroll through the message list.)
NOTE
YOU CAN SET UP THE CUSTOM MESSAGE BY FOLLOWING
THE CUSTOM MESSAGE EDITING PROCEDURE.
9. CONTINUE.
SELECT A STANDBY MESSAGE
1. Press , then press until the display shows
STANDBY MX. "X" represents the current message number
selected for the standby message. Two dashes mean that the fac-
tory-set message is selected.
2. To select a message, just press the corresponding number (1
through 8). To display the factory-set message, press 0.
OR
Press to scroll through all eight messages and the factory-
set message.
3. CONTINUE.
STAND BY The message that is displayed during normal vend-
ing periods when there are no out-of-service faults