Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
November, 2002 Page - 16 6700001
10. Cup Size(s):
a. Make sure the cup sizes you select agree with the cups you have actually
loaded during setup.
b. Press , the display shows X. Y. OZ. “X” is the currently selected drink
size for the cups in turret 2 (normally large cups), “Y” is the currently selected drink
size for the cups in turret 1. (Normally regular cups).
c. Press
to change the #1 cup ring size; press to change the #2
cup ring size.
d. Any changes made to the cup sizes must be “locked in”. There are two ways to
do this:
1) If you are keeping some cup sizes the same, or putting the cups in different cup
rings, press and hold
. The display momentarily shows CLEARING, two beeps
sound, then shows FINISHED. This will reassign the old throw times to the new cup ring,
if possible.
2) If you are loading all different size cups, or want to load all new default times, press
and hold . The display momentarily shows CLEARING, two beeps sound, then
shows FINISHED. This will reload the factory default times you have established. (See
the tables on the following pages for the factory default times).
e. CONTINUE