Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
November, 2002 Page - 50 6700001
VIEW NUMBER OF MUG VENDS
(NOT SHOWN IF ZERO)
1. Press , then press until the display shows MUG
X. “X” is the number of mug vends.
2. If desired, view this data by tray and individual selection.
3. Continue.
VIEW MACHINE ID NUMBER
1. Press , then press or until the display shows
I.D. XXXXXX . The X’s represent the 6-digit machine ID number.
2. You can edit the machine ID number if the supervisor access code has
been previously entered (See GAIN ACCESS TO THE SUPERVISOR
MODE).
3. Continue.
VIEW CUP RING CYCLES RELATED TO POSIVEND™
(NOT SHOWN IF ZERO)
1. Press , then press until the display shows PV.TOT
XX. XX represents the number of vends during which more than one
ring cycle was required to successfully dispense a cup.
2. Press to clear the count.
3. Continue.