Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
6700001 Page - 47 November, 2002
SET THE RATIO OF CHOCOLATE IN CAPPUCCINO
1. Press , then press until the display shows either:
RATIO XX "XX" is the percentage of chocolate contained in a
cappuccino drink or
RATIO OFF No ratio is selected.
2. Press
to switch between these two displays. To change
the value of RATIO XX, enter the numbers directly. This is a quick
way to set up your cappuccino drinks. See table D2 to see the actu-
al throw times/amounts for certain preset ratios. You can set a ratio
close to your taste, turn ratio OFF, then alter the product throw.
NOTE
Leaving this step with RATIO OFF displayed does not
alter any previous settings for E and I selections.
Leaving this step with a ratio set will alter those
settings. The ratio automatically selects the times for
water and dry product throw. The E and I selections no
longer appear in the displays for those steps. If you
desire greater control over your cappuccino drinks,
leave ratio OFF.
3. CONTINUE.
SET THE BREWER RINSE TIME INTERVAL
1. Press , then press until the display shows SAN.TIM
X.X. "X.X" represents the time of day (in hours and tenths of hours)
the machine rinses the brewer. For example, SAN.TIM 4.5 means
that brewer rinse takes place at 4:30 am. Use the number keys to
enter a new time, if desired. Range: 0.0 - 23.9 in .1 hour (6 minutes)
increments.
2. Press . The display shows SAN.HRS X.X. "X.X" repre-
sents how soon the machine rinses the brewer after the last brewed
selection. For example, SAN.HRS 2.5 means brewer rinse takes
place 2.5 hours after the last vend. Use the number keys to enter a
new time, if desired. Range: 2.0 - 12.5 hours, in .1 hour (6 minutes)
increments.
3. CONTINUE.