Filter
Top Products
HOT DRINK SETUP/PROGRAMMING GUIDE
6700001 Page - 15 November, 2002
9. Load Cups:
CAUTION
Use only cups which have been designed for use in a hot
beverage vending machine.
a. Support the cup mechanism in the upright position.
b. Push the latch forward to release the cup mechanism. Continue to support the
cup mechanism while you lower it into the loading position.
c. Remove the turret cover.
OBSERVE PROPER HYGIENE - DO NOT TOUCH THE CUPS!
d. Open the bottom of the wrapper on a stack of cups.
e. Insert the wrapped cups into the turret and pull the wrapper out.
DO NOT FILL CUPS ABOVE THE LEVEL MARKED ON THE
OUTSIDE OF THE CUP TURRETS OR ABOVE THE “FILL LINE”
LABEL INSIDE EACH TURRET, OR MOTOR JAMS WILL OC-
CUR. USE ONLY THE SAME SIZE AND BRAND OF HOT DRINK
CUPS IN EACH TURRET; DO NOT INTERMIX!
f. Replace the turret cover afrter theturrets have benn loaded.
g. Be sure the cup mechanism is locked into the upright position.